Sinclair ZX81

Sinclair ZX81

The Sinclair ZX 81 was the successor of the ZX 80, and can be regarded as an evolution of it.

The ZX80 could not handle floating point numbers or cassette data files, but the ZX-81 could. The ZX-80 had 4k ROM : the ZX-81 had 8K ROM with 30 additional functions and some instructions to drive the printer. Thanks to a higher level of integrations (the total number of chips in the basic system was 4, against the ZX80's 21), the ZX-81 cost £30 less than the ZX-80. The plastic case was also different. Whereas the ZX-80 looked cheap in it lightweight white case, the ZX-81 was beautifully designed in its black ABS plastic case.

The keyboard was still formed by an underprinted plastic, but this one was made of non-reflective material. Even with this slight improvement it was quite horrible to use, that's why a lot of additional keyboards appeared quickly on the market. Some of the keys sported up to 5 functions, right in the Sinclair tradition, accessible through the "GRAPHICS", "SHIFT" and "FUNCTION" keys.

Here are the functions added over the ZX-80 : ASN, ACS, ATN COS, EXP, INKEY$, PI, SGN, SIN SQR, INT, LEN, LN, TAN, VAL, <=, >=, < >, COPY, DIM A$, FAST, FOR … TO … STEP, LLIST, LLIST n, LPRINT, PAUSE, PLOT, PRINT AT, PRINT TAB, SCROLL, SLOW, UNPLOT. Some are quite useful and make you wonder how it was possible to make anything on the ZX-80 !? However, one function disappeared: TL$ which was used to return a string minus its first character.

The ZX-81 could be operated in two modes, SLOW and FAST. The FAST mode which was the only mode available on the ZX-80, only refreshed the display when the system had completed computing, resulting in a painful screen flicker! It was a useful mode when you had to do a lot of calculation without the need to see what's going on all the time on the screen. The SLOW mode, which was indeed quite slooooowwww, behaved like all other computers did, refreshing the screen all the time.

The ZX81 contained only four main chips : the ROM, Z80A CPU, 1K RAM and the Ferranti custom-made chip! It is as simple as that. The machine was assembled by Timex Corporation in their Scottish plant.

This computer was a very great success in Europe in the beginning of the 80's. It was very cheap and a lot of people who now are working on modern PCs or Macs, made their first move on a ZX 81 even though its performance was actually poor!

A very great range of peripherals were developed for this computer, among them : 3.5" floppy disk units, keyboards, high resolution graphic cards, RS232 or Centronics interfaces, RAM expansions, etc… In fact, it was possible to make a pretty good computer from the ZX 81!

The range of expansion options was quite extraordinary. For instance, Memotech created a whole range of modules which would piggy-back, one after another (and using velcro pads to secure to each other and the to the ZX81, as there was no mechanical locking on the edge connector).

So, for instance, you could have additional memory (up to 128k!), high-resolution graphics, disc controllers, joystick controllers, seria ports, and so on.

Popular add-ons also included replacement keyboards - one was a series of mechanical keys which stuck over the membrane keyboard, others involved re-housing the ZX81 inside a new, larger case with a "proper" keyboard.

In fact, the options were - seemingly - endless. Sadly the power supply wasn't particularly stable, so "glitches" were common, resulting in a system reset and the loss of hours of painstaking coding!